Fashion Patterns by Coni : The Art of Proper Fit

Proper Fit by Connie Crawford
  • Cart: 0 items

7927 - All Purpose

7927 - All Purpose
Click Image To Enlarge



  • Add to Cart:
Orders Ship Out Within 1 Business Day
Shipping Calculator Available on Shopping Cart Page
Free Shipping for orders over $89 (USA only)


We are discontinuing our interfacing. Get it while you can.

2 Yards - White Only Available

Fusible 15 MESH PASTE DOT.

Works with almost any fabric, especially 100% rayon, cotton or challis. Gives a softer tailoring hand. It has a special glue designed for rayon and other hard to fuse fabrics.

Interfacings Article

Connie puts a special emphasis on interfacings.
So she put together a more thorough treatment and explanation for her customers.
It was a little too lengthy to put into a simple web page, so we thought it would be much better as a pdf download. Here's the link:
c_corner_Interfacings.pdf (560 kB)

Know Thy Interfacings


Just like fabrics, interfacings are made of various fibers and weaves. Because of the variety of fabric weights, finishes, fiber blends, and textures, today's fashion sewer should select interfacings with the following criteria in mind: fiber content, finish (press-on or sew-in), color, weave, and weight.

There are many manufacturers of interfacings. Rather than choosing interfacing based on a brand name, select an interfacing fabric that is compatible to the weight, hand, and stretch of the garment fabric. Interfacing should not change the weight of the fabric or drastically affect the appearance of the garment.


Our interfacings are #1 quality interfacings manufactured for the garment industry. No manufacturer pre-shrinks their interfacings. Pre-shrinking interfacing is NOT NECESSARY. Heat is the element which "relaxes" the fibers. Notice that all our interfacings are made of either polyester or nylon - unshrinkable fibers. This is the case in 99% of all interfacings.


Cut a 3" square of the fabric and half this amount of the selected interfacing. Fuse the interfacing to half of the square. Allow the fabric to cool. Check the fabric piece by folding the un-fused side against the fused side. The fabric should have added body but should not be too heavy. It should roll slightly yet not give a stiff board appearance.


If the fusible interfacing is too heavy for the fashion fabric or the amount of glue is too thick, the weight of the interfacing can overpower the fabric and create the "orange peel" effect -- especially after laundering. Our interfacings contain just the right amount glue. You should not experience the "orange peel" effect with our interfacings, as long as enough heat and steam are used in the fusing process.

Use a damp pressing cloth between the iron and the interfacing.
HEAT -- The temperature should be on a hotter "steam" setting.
TIME & PRESSURE -- Hold the iron firmly in one place till the heat creates enough steam to melt the glue. Once each section is adhered to the fabric, then proceed to the next section. NOTE: If the interfacing peels away from your fabric, you have not applied enough steam and heat to the fabrics to melt the glue.